New here? Take the guided fertigation tour: a clickable walkthrough of every control on this page, using a worked tomato recipe. No account needed, nothing is saved. Built by an actual grower.
The readings and nutrient fields below hold the selected test's values, and save as you type. Switch tests or hit + New to start another. The open recipe uses the selected one.
Water readings
The descriptive numbers at the top of most reports. Leave 0 for anything not listed.
Measured nutrients (elemental ppm)
From your water report, in elemental ppm (mg/L). Leave 0 for anything not listed.
Trace elements aren't on a standard panel. Add them only if your lab ran them.
Reservoir
Concentrate tanks
Each tank is a concentrate your injector pulls from at its dilution ratio. Keep incompatible salts apart so nothing precipitates: calcium in one tank, sulfates and phosphates in another. You assign fertilizers to tanks in the calculator.
Batch tank
The buffer tank your injector fills with final-strength solution before you irrigate from it. The calculator tells you the total fertilizer in a full tank and how fast your concentrate drains.
Copies its tank layout, acid tank, ratios, volumes and water into the recipe open here. The other recipe is not changed.
None of your other recipes have tanks or water saved yet.
Your source water, tanks and injector ratios save to a recipe, so they need a free account.
No fertilizers yet. Add them on My Fertilizers and they'll show up in the dropdowns here.
How to use this
Pick a fertilizer for each row.
Set its Base element to the one nutrient you want to dial in to a number, usually N, P, or K. Then enter that Target ppm. The product's other nutrients come with it in their fixed ratio.
Check the Resulting Profile and Mixing Guide below for your totals and exactly how much to add.
Example: choose Calcium Nitrate, set the base element to N at 150 ppm. Its calcium comes along in ratio, so you don't dose it separately.
Example: choose Magnesium Sulfate, set the base element to Mg at 50 ppm. Its sulfur comes along in ratio, so you don't dose it separately.
Mixed in their own sprayer, not the feed, so they don't count in the feed totals. Spray ppm is the strength of the spray itself.
pH Adjustment
pH adjustment (acid) (optional)
Resulting Profile
N · P · K vs Target
Other Nutrients
Nutrient Sources
Each bar is one nutrient's total, split by product. Tap a nutrient to see the ppm each product adds. Before changing a product, check what else it carries.
Concentrate Tanks
Batch Tank Fill
Mixing Guide
Share, print or save the full recipe report. Save downloads a PDF.
Paid plans
This demo is the free calculator. Pro adds:
Auto-adjust (Pro): sets every product's ppm in one step for the closest fit to your targets, and suggests products that would close a gap.
pH and acid dosing (Pro): sizes the acid from your water test.
Injectors: a direct-feed or siphon injector with one fertilizer tank and an acid tank on Home. Batch tanks and up to 6 tanks on Pro.
Saved products and recipes: 2 products and 1 recipe free, 3 each on Home, unlimited on Pro. Each recipe keeps its site's tanks, water and medium.